Hardwood Floors, Cork & Bamboo Flooring

Hardwood floors have changed dramatically. Today, many manufacturers offer hardwoood species from around the world. At FLOOR CENTER of Minnesota, we have the largest selection of hardwoods from the richly-grained exotic woods to the distinctive North American hardwoods. Our hardwood floors come from the finest wood flooring manufacturers and have the finest finishes that will add beauty and charm to any room for many years.

Quality hardwood floors deserve a quality installation and FLOOR CENTER'S trained installation crews will make sure your floors are installed correctly.

Reliable service and expert installation are a trademark of FLOOR CENTER, where you get fabulous floors for less.

Hardwood floors comes in 4 basic constructions: 3/4" solid wood flooring (unfinished, or pre-finished) engineered wood (unfinished, or pre-finished) longstrip wood planks (pre-finished) parquet

The rich look of hardwood floors adds warmth and charm to any room in the home. For centuries people have used wood floors in homes, churches and even stores.

Through advancements in finish technologies  and superior construction techniques  manufacturers of hardwood floors are able to produce tougher finishes and more stable products. This means quality engineered hardwood floors can go in almost any room in the home and over a wide variety of subfloors, including dry, fully-cured concrete slabs.

Today's hardwood flooring comes in a wide variety of wood species. Besides the popular and well known North American hardwoods (like oak, maple and ash) we offer  a variety of exotic hardwood species from all over the World.  Exotic hardwoods  offer unique and unusual  visual character and give homeowners the chance to better express their personal decorating tastes with a more unique wood appearance.

Another popular trend are the handscraped hardwood floors  offered by hardwood manufacturers, such as Mohawk. If you want the rich look and charm of hand-made flooring than you won't want to miss previewing the hand-scraped hardwoods.

Homeowners looking to use hardwood floors in their homes have the option of purchasing three different types of wood flooring. Although the end results may look the same there are distinct advantages for using each type under different applications.

• Solid Hardwood Floors - are a solid piece of hardwood cut into wood planks that are generally 3/4" thick. (Above ground level areas only, not recommended for concrete slabs.)
• Engineered Hardwood Floors - are several plies of wood that are glued and laminated together to form a wood plank. Range in thickness from 1/4" to just over a half inch. (Can be installed almost anywhere in the home, including over dry concrete slabs.)
• Longstrip Hardwood Floors - are really an engineered construction but with a long and wider plank. This allows the top layer to splice 2-3 rows of thin hardwood strips into one plank. Longstrip planks can be glued-down, stapled or floated over a wide variety of sub-floors and used almost anywhere in the home, including dry basements.
• Exotic Hardwood Floors - are used to described hardwood species from around the World. these hardwoods are not found in North America and come from Australia, Africa, Brasil and the Far East. Exotic hardwoods offer unique wood graining and colorations. Most exotic floors are available in engineered wood construction but some are available in solid hardwood planks as well.

Once installed it is extremely difficult to tell these three different wood flooring construction types apart. Both the engineered and the longstrip have several thin layers (plies) of wood that are glued together. By gluing the plies together you get better dimensional stability within the plank itself, which allows these floors to be used on job sites that have a higher percentage of moisture content than normal. This includes basements and over concrete slabs where solid strip wood floors are considered off limits.

Another choice you have to make is whether to want a pre-finished or an unfinished hardwood floor that has to be finished in your home. The pre-finished floors offer a wider variety of wood species and saves hours of labor and cleanup. While the unfinished wood floors allow you to have a really custom, job-site finish and a completely smooth, uniform surface. You also get an extended factory finish warranty with pre-finished floors, but not with most job-site finished flooring.

All the Hardwood Flooring at the FLOOR CENTER are factory finished for superior durability.